Enge Plas

Special Promotion on Coperion K-Tron Spare Parts

Marketing — Fri, 11 Oct 2019 09:01:43 +0000

Save 33% on SFT Special Offer!

Order 3 K-Tron Load Cells for the Price of 2. It’s only valid for sets of three of the following:

Load Cells (K-SFT-II, K-SFT-III)
D5 Scale Weighing Modules
SWB Belt Feeder Weighing Modules

Save 40% on a K-Vision Special Offer!

Trade in your old K-Vision for a new K-Vision II includes with newer capabilities:

Connected via Ethernet as a remote interface for visualization & control of Feeder and Line parameters
VNC remote monitoring
Email capability
One-touch setpoint ramping

This offer valid during July & August 2019 for a limited time only!

For more details on this, you may contact our sales representative by email or by clicking thru the button below.

The post Special Promotion on Coperion K-Tron Spare Parts appeared first on Enge Plas.

10% RAPID Spare Parts Discount Promotion

Marketing — Fri, 11 Oct 2019 05:55:48 +0000

Our distinguished partner RAPID offered a 10% discount for wear and tear components of Rapid machines.

Wear and tear parts are:

Rotating knives
Fixed knives
Bolts and washers
Screens
Transmission belts
Flaps

This offer valid until 31st March 2019 & there is no limit to how many set of spares you want to buy.

For more details on this, you may contact our sales representative by email or by clicking thru the button below.

The post 10% RAPID Spare Parts Discount Promotion appeared first on Enge Plas.

Coperion Adds New Laboratory Extruder to the STS Series

Marketing — Mon, 05 Aug 2019 08:38:45 +0000

Coperion has expanded the STS series by one more extruder size – The new STS 25 Mc¹¹extruder with a 25 mm screw diameter is designed especially for research and development tasks as well as for production of small batch sizes of 2 kg and more, achieving throughputs of up to 80 kg/h.

It boasts all the advantages of the STS Mc¹¹ series, has a simple design, is operator-friendly and easy to clean. Its feed barrel is equipped with an exchangeable sleeve insert to facilitate cleaning. In addition the die head is in quick-release design for easy operation and accelerates product changes again. The base frame has a closed, simple to clean surface and is equipped with castors for easy movement of the extruder and fast installation. Water cooling, vacuum unit and air supply can be integrated into the base frame as an option.

For maximum efficiency and energy savings Coperion has equipped the new STS 25 Mc¹¹ extruder with cartridge heaters for precise single zone tempering of each individual barrel.

If you like to know more about this STS 25 Mc¹¹extruder, you can visit Coperion page or

Contact Enge Plas to learn more about Coperion's new STS 25 Mc¹¹extruder

The post Coperion Adds New Laboratory Extruder to the STS Series appeared first on Enge Plas.

Vortex Releases Ship Loading Spout for Handling Grains

Marketing — Mon, 05 Aug 2019 08:32:45 +0000

Vortex new Grain Ship Loading Spout – capable of load rates over 113,510 bushels | 141,260 ftᶾ | 4,000 mᶾ of grain per hour, the Vortex Grain Ship Loading Spout is among the world’s fastest and most efficient loading solutions.

When properly applied using proprietary engineering controls (headchute, spout, dust collection, etc.), the Vortex Grain Ship Loading Spout is specifically designed for dust-free grain loading, thereby protecting the port’s nearby neighborhoods, waterways and other surrounding ecosystems from grain dust emissions into the atmosphere.

Grain Ship Loading Spout is equipped with a Discharge Filtration System for improved dust management at the point of discharge. It is specifically designed to:

(1) Displace dust-laden air from its source

(2) Separate dusts from the air

(3) Exhaust the cleaned air into the atmosphere

(4) Re-entrain the filtered dusts back down into the load.

For more details on this Vortex new grain ship loading spout , you can visit Vortex page or visit Vortex website

Contact Enge Plas to learn more about Vortex New Grain Ship Loading Spout

The post Vortex Releases Ship Loading Spout for Handling Grains appeared first on Enge Plas.

K-Trade Fair 2019!

Marketing — Mon, 05 Aug 2019 07:32:12 +0000

16 – 23 October 2019

Dusseldorf, Germany

Yes, youbangunan-keselamatan/cipta-laman-selamat-secure-page-menerusi-asas-php">Cipta laman selamat (secure page) menerusi asas PHP

Penjanaan dan pengesahan nombor kad kredit menerusi algoritma Luhn > – is the World’s No.1 trade fair for the plastics and rubber industry. This time, The K Fair gathers the most important supplier of plastics and rubber machinery, raw and auxiliary materials and semi-finished products, technical parts and reinforced plastic products under one roof. The highlight of this trade fair are resource and energy efficiency from the ecological and economic points of view.

And as usual, our partners are exhibiting, and we’d like you to invite you to visit them with us!

For your convenience, we’ve compiled a list of booth locations of our participating partners:

Bunting	Hall 10 / J47
Coperion	Hall 14 / B19
*Gneuss*	Hall 9 / A38
Haver & Boecker	Hall 12 / A32
*Movacolor*	Hall 11 / D58
MTI	Hall 9 / B22
*Rapid*	Hall 9 / E19
Shini	Hall 11 / B57
Zerma	Hall 9 / D59

In the meantime, you can visit The K Fair website if you want more details on the exhibition or

The post K-Trade Fair 2019! appeared first on Enge Plas.

Marketing Campaigns

Marketing — Thu, 19 Jul 2018 06:29:25 +0000

Enge Plas's E-Newsletter: Application case studies & Articles

June 26, 2018

Newsflash with Enge Plas Automation, application case study & more!

May 22, 2018

The post Marketing Campaigns appeared first on Enge Plas.

Case Studies

Marketing — Thu, 19 Jul 2018 01:14:43 +0000

PVC Material Weighing System

PVC Silo

200L - Hopper come with pickup chute

Vacuum Pump

Autoloader

Flexible joint at autoloader

Piping Installation

Unload PVC

MTI Cooler Mixer

Dry Blend Silo

Extruder Loading System

Compressor Station

Stabilizer debagging Station

Extruder Loading System

Upgrading for Water Cooling Tank

600L Water Tank

300G Poly Tank

HP Pump

Filter Group

20ft Container Tilting Platform

Tilting Platform

Hose Frame

The post Case Studies appeared first on Enge Plas.

Technical Articles

Marketing — Wed, 18 Jul 2018 09:06:40 +0000

What is a Multi-Port Diverter?

A Multi-Port Diverter is an integrated and automated solution for diverting and/or converging dry solid materials. Depending on the application, a multi-port diverter can be designed to transport materials from a single source or several sources toward any number of destinations.

Wye Line Diverter vs. Flex Tube Diverter: What’s The Difference?

The Wye Line Diverter and the Flex Tube Diverter are among Vortex’s most popular diverter valves for pneumatic conveying applications.

There are two primary factors when considering the Wye Line Diverter and the Flex Tube Diverter. Those being :

Concerns for material cross-contamination
Available space/stack-up height

Standing Column vs. Flowing Column: What’s the Difference?

In process engineering, for every solution to a consideration, three more considerations often arise. Material conveyance and valve selection are no exception. This white paper will address the difference between a standing column of material versus a flowing column of material, as well as considerations to be made when selecting a process gate to address each.

A “standing column” describes material accumulation above and below the gate while a “flowing column” describes materials freely passing through the gate.

The primary difference is that a “standing column” describes static materials at rest, while a “flowing column” describes suspended materials in motion.

What is an Air-Gravity Conveyor?

An air-gravity conveyor is a device for moving a variety of light-weight, fluidizable dry bulk powders. The conveyor consists of a rectangular chamber separated by an air-permeable, porous media. The media is placed along a horizontal plane to separate two chambers within the conveyor: An upper chamber to handle the material being conveyed, and a lower chamber to handle compressed air.

Techniques for Dust Management during Loadout

In dry bulk solid material handling operations, workers can be exposed to a plethora of hazards if proper precautionary measures are not taken to create a safe, dust-free environment. Learn on Health & Safety, Environmental issues, Vortex Loading Solutions etc.

Things to Consider When Diverting or Converging in Dilute Phase

Dilute phase conveying is described as low pressure, high velocity material movement. Oppositely, dense phase conveying is characterized as high pressure, low velocity material movement.

If material characteristics and application parameters permit, dilute phase conveying is often preferred because it can be more energy efficient and can improve process efficiencies by conveying materials at higher rates of speed. However, many considerations must be made when designing a dilute phase pneumatic conveying process.

This article will address just a few of the many considerations that must be made before selecting valves to divert or converge dry materials in dilute phase.

Vortex Pivoting Chute Diverter Lets You Shift on the Fly

When the need arises to divert dry bulk material during gravity flow situations, one normally considers a typical flapper style diverter for the application. In applications where the sealing of non-abrasive, fine material is involved, the flapper is a perfect choice. There are applications and material handling situations, however, where a different style diverter might offer distinct advantages over a flapper. The Vortex Pivoting Chute Diverter embodies those advantages.

Orifice Gate vs. Roller Gate: What's the Difference?

Since their conception decades ago, the Vortex Orifice Gate and the Vortex Roller Gate have been two of Vortexs most popular solutions for handling dry bulk solid materials. By their simplest definitions, both the Orifice Gate and the Roller Gate are slide gates. However, the application benefits for each gate can be quite different.

Safeguard Technologies for Dry Bulk Material Handling

When designing a system for dry bulk material handling, it is important to consider all possible scenarios a slide gate may face during its life cycle and equip it to appropriately handle those obstacles as they arise. For this reason and as a safety precaution, it is beneficial for a slide gate to be equipped with both a fail-safe air tank and a vented ball valve.

Using Trending Capabilities to Troubleshoot Continuous Feeder Performance Problems

Tablets & Capsules

Learn how to use a loss-in-weight feeder’s trending capabilities to help determine the cause of feeder performance problems.

Controlling upstream and downstream influences on loss-in-weight feeders

Powder Bulk Engineering

Loss-in-weight (LIW) feeder performance is affected by a number of influences, both internal and external to the feeder and feeder process. Understanding the significance of these influences is critical for achieving optimal performance. This article will describe some strategies to help ensure accurate weighinhg with your LIW feeder.

Conquering the Main Wear Factors in Diverter Valves

Powder & Bulk Solids

A diverter valve is used to divert material from one source to different destinations in a pneumatic conveying system or a gravity pipe. Pellets, granules or fine powders passing through the diverter valve cause wear along the valve’s passage, especially with abrasive products as used in the mineral and cement industries. Examples are raw meal, lime, fly ash, bypass dust, clinker, cement, petcoke and lignite to name a few. Diverter valves that have been designed with main wear factors in mind make it possible to convey even highly abrasive powder bulk materials economically and reliably. They also enjoy a long service life and are easy to maintain.

Nut Butter Manufacturer Modernizes Plant Operations

Food Engineering

The complete material handling system provided by Coperion K-Tron includes several pneumatic transfer lines for various stages of the peanut butter process. First, raw peanuts are vacuum conveyed direct to a peanut roaster. After the peanuts are roasted, a second line transfers them under vacuum to the blancher. Once the peanuts are blanched, they are then vacuum conveyed to yet another line. There, they are metered via a Coperion K-Tron weigh belt feeder to a screw conveyor, and both sugar and salt are added to the nuts via Coperion K-Tron loss-in-weight feeders

Defining Feeder Accuracy For Continuous Processing

Processing Magazine

Continuous processing is a manufacturing practice that has been used in the plastics, chemical and food industries for decades. Although primarily used for liquid processing, the innovations made in dry powder feeder technologies have enabled the use of continuous dry ingredient feeding for a variety of applications.

Optimize Feeding to Make More Money in Twin-Screw Compounding

Plastics Technology

Every business want to increase profits. Companies can deploy many strategies to do so that can fall across various areas of the business, such as reducing inventory, negotiating lower prices from suppliers, or increasing marketing efforts, to name a few. When it comes to operations, the capital equipment is often already in place and is therefore a sunk cost. Increasing profitatbility in this case is usually depends on maximizing productivity of these assets. For twin-screw extrusion processes, this is most easily achieved by increasing throughput rate, thereby spreading operation costs over a greater amount of product produced in the same unit of time.

The post Technical Articles appeared first on Enge Plas.

Visit with us at The Powder Show (iPBS) in Chicago!

Damien Chua — Mon, 16 Apr 2018 01:01:08 +0000

24-26 April, 2018

Chicago, USA

Yes, that’s right!

The International Powder & Bulk Solids Conference & Exhibition — The Powder Show — is the leading event for professionals in powder and bulk solids technology in the Western Hemisphere. Since 1976, The Powder Show has brought the world’s processing and bulk material handling community together to share ideas, deepen industry knowledge and explore the equipment and technologies that drive the industry. This April, The Powder Show will once again connect over 3,500 industry professionals and more than 350 leading suppliers for three days of unmatched industry immersion and innovative equipment.

And as usual, our esteemed partners are exhibiting, and we’d like you to invite you to visit them with us!

For your convenience, we’ve compiled a list of booth locations of our participating partners:

Bunting : 1432
Coperion : 1413
Kason : 2107
Monitor : 2407
Vortex : 2135
Volkmann : 1620

In the meantime, you can visit The Powder Show website if you want more details on the trade show or

The post Visit with us at The Powder Show (iPBS) in Chicago! appeared first on Enge Plas.

Enge Plas welcomes you to visit Chinaplas, this time @ Shanghai!

Damien Chua — Thu, 12 Apr 2018 03:27:14 +0000

24-27 April, 2018

Shanghai, China

Yes, that’s right!

The 32nd International Exhibition on Plastics and Rubber Industries is just round the corner, and you can be sure our partners are exhibiting! The question is, are you up for the challenge of visiting this huge trade show?

For your convenience, we’ve compiled a list of booth locations of our participating partners:

Coperion : Hall 2H, Booth 2J83
Rapid : Stand 5.1E11
Shini : Booth 5.1H, T01
Gneuss : Stand 2J31

In the meantime, you can visit the Chinaplas website if you want more details on the trade show or

The post Enge Plas welcomes you to visit Chinaplas, this time @ Shanghai! appeared first on Enge Plas.