Enge Plas - BM Silo Logo

BM Silo

About BM Silo

BM Silo’s well-known “Modular silo” was first launched in the 1970s, and despite its many variants today, the same principle continues as the basis of products to this very day. They have exported silos since 1972. The “Kit-form” packaging means that the silos are ideally suited for export and some 80% of turnover is exported.

The knowledge gained through world-wide dealer network is used to develop, enhance and expand the product range. The production premises, located in a previous farm building, appear up-to-date and appealing with the latest equipment in CNC machinery and LEAN production.JUST-IN-TIME production allows BM Silo to provide extreme flexibility in terms of delivery times and product mixes.

BM Silo has some 35 employees of which many have been with us for a number of years but they also accept social responsibility as we usually employ unemployed and unskilled employees. Their employees are always willing to seek in-service training to gain new knowledge so they can produce as efficiently as possible and maintain production at the address in Tvis.

This ensures the basis of a well-documented quality product at competitive prices throughout the world.

 

Modular Silo
BM Modular silo is a square or rectangular modular built silo designed for storing dry materials. For decades, this silo has been renowned for its very high quality and manufacturing precision.

 

Agrosilo
BM Agrosilo is the “kid brother” of the Modular silo renowned for its superior quality for decades.The silo itself remains unchanged, but the optimised leg structure and the bottom cone without partition wall offer two obvious advantages – lower cost and shorter assembly time.

 

Mineral Silo
Mineral Silo is a square, modular silo designed for the storage of dry minerals. For decades, the silos have been known for their very high quality.

 

Outdoor Modular Silo
Outdoor Modular silo is a square, modular built silo for storage of dry materials. All of the silo’s side panels have external flanges with downfolded edges that seals the horizontal joints. The flanges and the heavy duty rubber filler strips ensure that the silo is completely sealed.The silo is dimensioned for a basic wind speed of Vb = 27 m/s in terrain category II, and a snow load of Sk = 0,9kN/m².

 

Round Steel Silo
Round steel silo is made of aluzinc plates which are high quality plates that combine the best properties of aluminium and zinc. Tests show that this type of plate has a considerably longer service life than galvanised plate.Delivered fully assembled from the factory or unassembled for export.

 

Outdoor Wooden Pellet Silo
Outdoor wood pellet silo is a square, modular silo designed for the storage of dry materials. All side plates of the silo have exterior flanges with bent-down edges which close the horizontal joint. With the enclosed sealant, this ensures thatthe silo can be made perfectly tight.

 

Mobile Hopper
Mobile Hopper has been developed specifically to store granulate in the plastics industry.With the wheels, moving the materials in production as required is easy.

 

<p> Find out More

Contact us to learn more about BM Silo

Zerma

About Zerma

The name ZERMA comes from the German word zerkleinerungsmaschinen, meaning crushing machine. Since the company was founded in 1943, this has remained the company’s mission.

ZERMA has traditionally focused on the development and production of size reduction machinery for the plastics industry. However, today ZERMA has expanded into related industries such as tire recycling, e-waste and wood recycling. Their core strength lies as a machinery and component producer. As such they are an ideal partner for systems integrators and OEM projects.

With more than 70 years of experience, ZERMA is one of the leading manufacturers of high quality size reduction machinery. From the small GSL slow speed granulators to the versatile GSH heavy duty granulators including small and compact granulators with integrated blower and soundproofing. Specialized machines like the GSP pipe and profile granulators and ZERMA PM discpulverizer systems for fine grinding applications. Adding a complete line of shredders, starting with light shredders for wood applications, up to large heavy duty shredders ZERMA recycling machines range in drive power from 2.2 kW up to 200 kW and cover the whole spectrum of plastics size reduction applications.

 

Granulators

GSL

The slow speed granulators in the GSL range are mainly used in injection and blowmolding processes as beside the press machines to grind runners and sprues. Themachines can be used for rejected products in the inline recycling process as well.Different hopper and base frame designs make it possible to integrate the machinewith most types of injection molding machines and robots.

GSE

The GSE series of machines are designed as economical granulators for in-house recycling. The aggressive tangential infeed and advanced cutting geometry of the GSE series allows bulky hollow parts to be ground. THE whole GSE granulator line achieves a high quality regrind independent of the material type or form such as injection moulded parts, blow moulded parts, profiles, sheets, film, etc.

GSC

The GSC series of compact soundproofed machines are mainly used in inline operations or as central granualtors for processing of hollow thin walled products, or runners and sprues. The integrated sound proofing makes it possible to easily place the machine in existing operations. With different rotor designs and a wide variety of options the machines can be tailored for many different applications.

GSH

The wide range of rotors and hopper styles allow the GSH machines to be tailored to almost every application in the plastic recycling field.The GSH heavy duty granulators are mainly used as central granulators for in house recycling applications to process thick walled parts in one step or as a second step granulator after a shredder to reach higher throughput rates.

GSP

Conventional granulators have substantial problems handling long pipes and profi- les. Therefore ZERMA developed the GSP range. Thanks to the almost level feeding hopper, long pieces can be fed easily. While the machine is operating there is no risk of blocking, in case of congestion no more material will be accepted by the machine. Once the grinding chamber is empty the machine will accept material again.

 

Shredders

ZBS

The ZBS shredders have been designed for in house recycling of small lumps and purges from injection and blow molding processes. The typical input materials are small and medium sized cakes such as head waste. The material can be shred to reduce the volume or processed further in a granulator to be reintroduced into the production process immediately.

ZSS

The ZSS shredders have been designed for a wide array of applications and industries such as in house and general recycling, electronic waste and post consumer waste handling with a wide variety of input materials. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction for example in a GSH granulator.

ZIS

The ZIS shredders have been designed with big volume parts such as IBCs, pallets and big barrels in mind. While it can be used for in house recycling in big volume blow moulding operations it is also versatile enough to be used for general recycling in the plastic and wood industry. Like all ZERMA shredders the ZIS can be equipped with a wear package for processing of highly abrasive or filled materials.

ZXS

The ZXS shredders have been designed for the most demanding and high throughput applications in recycling industries. The input materials can be all kinds of plastics, wood, paper, cardboard, e-waste, post-consumer waste, rubber, etc. in various shapes and sizes. Typical input materials are: fridges, purges, tires, pallets, bales, drums and barrels, pipes, film and so on…

ZRS

The main focus of the ZRS shredders is the shredding of large diameter pipes or bundles of smaller pipes and profiles made from HDPE, PP and all kinds of PVC. Further the machines can be used for recycling of other plastic parts, such as large lumps, stacked wheelie bins and pallets. In combination with other ZERMA size reduction equipment such as granulators and pulverizers we are able to provide a complete turnkey recycling solution.

 

Find out More

  • Visit Zerma
Contact us to learn more about Zerma

Enge Plas - Vortex Logo

Vortex

About Vortex

Vortex® is considered the world leader in valves for handling dry bulk solids. Sitting on a 15-acre campus in Salina, KS, our state-of-the-art manufacturing facility and office complex spans over 150,000 square feet. Their current footprint allows them to introduce lean manufacturing methods supported by advanced fabrication equipment and laser cutting technology.

As Vortex began to expand and modernize, they were also stretching footprint into new global markets. They have sold valve solutions in over 75 countries worldwide with local representatives in 30-plus countries. Along with their corporate headquarters located in Salina, KS, they have global offices in the United Kingdom, Switzerland, Latin America, and Asia.

It all began in the 1980s when the company was awarded a patent on the Orifice Gate™. This new and innovative valve design surpassed the industry’s expectations for handling dry materials in pneumatic conveying. Soon following the Orifice Gate came the launch of the Wye Line Diverter™. This diverter valve applied the same design concepts of the Orifice Gate dramatically improving process efficiencies when compared to traditional flapper or tunnel style diverters.

QUANTUM® Series

Vortex Quantum Series slide gates and diverters are the valves our customers have been using for decades to shut off, meter, and divert their dry bulk material. It’s our traditional line of valves for dry bulk processing and conveying through gravity flow or pneumatic (pressure or vacuum) conveying.

Some of the industries that use Quantum valves include but not limited to: agriculture, chemical, coffee, dairy, foods, milling, pet food, petrochemical, pharmaceutical, plastics, rubber, textiles, tobacco, and wood – to name a few.

 

TITAN Series

Vortex Titan Series slide gates and diverters are engineered for HEAVY-DUTY material handling applications.  These applications include materials that pose excessive abrasion or wear issues, situations that call for extremely large-sized valves and diverters, and conditions that warrant additional considerations that will allow these valves to be as successful as possible in extremely harsh environments.

Some of the materials handled with Vortex Titan valves include but not limited to: alumina, bauxite, cement, clinker, coal, fly ash, frac sand, gravel, glass cullet, lime/limestone, metal powders, potash, rock and sand – to name a few.

 

LOADING SOLUTIONS

Loading Solutions offer a complete line of telescopic loading chute systems for the loading process. We also custom engineer any loading spout system to meet the most demanding loadout application requirements, including corrosive or hazardous materials, long distances, low and high temperatures, etc. Vortex fully assembles, factory tests and packages every loading spout system before shipping it to the facility to provide ease of installation and to ensure optimal performance once in use.

Some of the materials handled with Vortex Loading Solutions include but not limited to: petrochemical powders, plastic granules, wood pellets, cement, grains, sand, gravel, or coal. – to name a few. And can be used in open, semi-enclosed and closed vessels: trucks, railroad cars, tankers, ships, barges, and open-stockpiling.

 

Engineered Solutions

Engineered Solutions for handling dry bulk material have always been a part of Vortex. Our application engineers listen to the customer’s needs and match the right valve to the application parameters. Material characteristics, environment, and valve requirements all must be considered to properly modify the valve to fit the application.

Because the combinations are nearly endless, a commodity valve or off the shelf valve will not be enough. Vortex offers literally millions of variations of slide gates and diverter valves to meet almost any dry bulk processing application. We can sometimes take one of our standard valves and make some minor modifications to fit the customer’s application. Other times the only thing left standard on the valve is the famous black and silver Vortex sticker.

 

Find out More

Contact us to learn more about Vortex

Enge Plas - Volkmann Logo

Volkmann

About Volkmann

Volkmann GmbH is based in Soest in Westphalia and was founded in 1973 by Jürgen and Ingrid Volkmann as a consulting company for production automation. The company started in the early years with applications within vacuum technology. Own ideas and developments such as the patented „Säuferbalken“® (combined vacuum stripping process for drying belt surfaces and for liquid recovery in mills) and the patented Multijector® (special construction form of a multi-stage ejector vacuum pump operated by compressed air) made the company a partner driven by ideas and application technologies for customers from widespread branches of industry.

Thilo Volkmann now heads the company since 1991 and is the second generation. Today, Volkmann is a specialist in the transport and handling of bulk materials. In particular, Volkmann offers customers from the Chemical, Food Processing and Pharmaceutical Industry class leading standards as well as individually planned and produced systems for the safe, hygienic and user-friendly handling of powders and bulk materials. Thanks to a professional and creative team, Volkmann consistently produces new and better solutions for itself and its customers which can be manufactured with the company’s modern machinery and lean manufacturing principles Today,  Volkmann employs nearly 100 employees and operates subsidiaries in Great Britain, France and the USA. Volkmann is internationally present in many countries with local agencies.

 

Vacuum Conveyors

Make all powder handling in production processes safe and reliable, make the work of your production staff easier and improve the conditions at the workplace. Choose Vacuum Conveying systems from Volkmann.

  • user friendly systems with safe material transfer
  • easy material aspiration and dust-free loading of machines
  • gentle dense phase conveying, no segregation of material mixtures
  • optimum hygiene conditions
  • reliable filter systems in GMP quality
  • simple to install and to operate
  • low energy consumption
  • favorable investment- and operating costs

The different modular families of Vacuum Conveyors for the Chemical-, Pharma- and Food-Industry allow customized modifications of all conveyors regarding the individual application. Even critical materials can be conveyed safely and adapted conveyors can be used for hazardous applications like inside explosion areas or with highly toxic materials.

The modular design allows quick delivery times for complete conveyors (1-2 weeks for Food-/Chemical-Conveyors, 3-4 weeks for Pharma Conveyors, 4-8 weeks for highly customized systems).

Typical conveying capacities: 100 kg/h up to 3.5 t/h (max. 12 t/h)

Typical conveying distance: 15 m far and 10 m high (max realized 100 m far + 40 m height)

 

Product Loading Stations

Discharge products such as powder, dust and granulated material directly from barrels, drums, bags, special bins and containers, even with plastic liners. Combine these units with process control systems and integrate remote controls or monitoring systems. All levels, alarms and error messages as well as other required information can be transmitted by an interface for evaluation and monitoring.

Ask us for our solutions on how to pick up and convey the materials within your production process, e.g. for emptying bags and special bins, Big-Bags, Silos etc. Utilize Volkmann’s experience in powder handling.

Your benefits:

  • Dust-free material handling
  • Product aspiration and loading with full control
  • Avoid the difficult manual handling of all sorts of bulk materials packed in drums/containers
  • Reduce health risks in the workplace
  • Protect the environment from hazardous materials
  • Increase the quality of your final products and the working environment

 

Stationary & Mobile Hoists

The handling and positioning of a vacuum conveyor above a container, bin or production machine can be made easier by use of a stationary or mobile hoist. Volkmann hoists are lightweight and easy manoeuvrable.

Solutions and benefits:

  • One Vacuum Conveyor to feed into different systems
  • Quick, comfortable and hygienic operation and handling
  • pneumatic, electric or manual operation
  • hygienic versions (pharma design)
  • customized connections and docking solutions available
  • designed and manufactured from Volkmann in Germany

 

Find out More

Contact us to learn more about Volkmann

Enge Plas - Schrage Logo

Schrage

About Schrage

Schrage Conveying Systems is your specialist for tube chain conveyors – worldwide.

For more than two decades, they have been planning and implementing conveyor systems for various bulk solidsand many industries – individually suited to your needs. Their tube chain conveyor also reliably transports your bulk material from A to B.

There is only one thing on everyone’s mind: how to go up in the world. We are slightly different in that we can also go sideways and diagonally. It is all very simple: you need to convey bulk materials from A to B and Schrage has the corresponding tube chain conveyor technology for that purpose.

As a complete conveyor system, it is modular with a flexible layout for a large variety of industries and bulk materials, along with interesting additional components to meet different desires. Thisis all planned by highly specialized staff members who all have a passion for the new challenges that the handling of bulk materials poses. And the in-house test conveyor is looking forward to receiving your samples.

Schrage’s philosophy is equally straightforward.  If you tell them what bulk material you would like to convey, they will provide the appropriate solution. For more than 20 years, Schrage, a family business, has been using its expertise, experience, and curiosity to deliver solutions to where they are needed – directly to you.

 

Tube Chain Conveyor: One System – Endless Combinations

The idea is simple. Schrage plans your conveyor according to a modular principle. Moreover, your system can be tailored made, material properties, and speed to correspond perfectly with your bulk material.

That is why they can offer you the ideal bulk handling system – their chain conveyor in five different sizes, along with many fascinating and self-developed additional components: Brush or knocking units for cleaning the chains and for discharging, special slider and flap systems for an optimum residual discharge in the discharge unit. Or how about a tube chain conveyor as a heat exchanger?

 

Horizontal, Vertical or Upright:Tube Chain Conveyors are real Quick-change Artists

You can take Schrage’s motto “We Convey Solutions” quite literally. Because the Schrage tube chain conveyers are so flexible that they can be employed in a nearly infinite number of variations.

Due to their compact dimensions, low maintenance, ease of use, and astonishingly low energy consumption, the Schrage chain conveyers have rightfully become extremely popular. And we would be pleased to help you choose your ideal variation.

 

Find out More

Contact us to learn more about Schrage

Enge Plas - Purge X

PurgeX

About PurgeX

PurgeX® is a mechanical purging agent that enables the safe, effective and efficient cleaning of plastics processing equipment.

  • Metal surfaces are cleaned using a unique scrubbing effect. The material is not abrasive to screw, barrel, die etc.
  • Particularly useful when changing colour, polymer, or when screw and barrel are carbonized. Enables rapid purging of the previous colour and/or polymer, so that machine downtime and loss of expensive polymer is minimized.
  • Suitable for injection moulding, extrusion and blow moulding processes.
  • Cost effective, as only a small amount is required, usually at 20% add rate to the polymer.

 

How PurgeX® works

PurgeX® is a granular material that is blended in with a small amount of the polymer that you are using and fed into a starved screw/barrel.

The blended material is processed through your equipment at similar temperatures and revs to typical run conditions for the carrier polymer.

The PurgeX® material softens slightly, but does not melt, and thoroughly loosens carbonized and degraded resin, allowing the polymer to flush out the system.

This makes it particularly useful for:

  • Cleaning colour from your equipment
  • Cleaning polymer from your equipment
  • Removing carbon build-up and black specks
  • Regular preventative maintenance
  • Before manual cleaning

 

PurgeX® grades

  • PurgeX® T for injection moulding (except where openings are less than 1.5mm)
  • PurgeX® S for extrusion, blow moulding, and injection moulding with openings less than 1.5mm
  • PurgeX® R for hot runner systems with a minimum clearance of 0.75mm

 

PurgeX® A (acrylic) grade

PurgeX® A is cell cast acrylic in granular form. As distinct from the T, S and R grades, PurgeX®A grade is typically used in unblended form (i.e. at 100%) in extrusion and compounding processes.

PurgeX® A provides a gentle scrubbing effect to the screw and barrel and removes build up of carbonised material.

PurgeX® A softens but does not melt, therefore it provides a scrubbing effect – it does not scratch or wear the screw or barrel.

Suggested purging procedure:

  1. Adjust temperature if necessary. Suggested temperature range for purging is 240-260°C.
  2. Starve screw and barrel of current material.
  3. Add PurgeX® A in slow, continuous manner into hopper.
  4. Flush out PurgeX® A with next material to be processed.

Nozzles, dies and screen packs should be removed during purging to avoid blockages unless opening is large enough to allow acrylic particles to pass through in softened form (approx 2.0-2.5mm).

 

Find out More

Contact us to learn more about PurgeX

Enge Plas - Pulsotronic Logo

Pulsotronic

About Pulsotronic Anlagentechnik

Pulsotronic-Anlagentechnik GmbH has its registered offices in the Chemnitz-Zwickau business area of Niederdorf/Stollberg. Because of the permanent, positive development of the business, a new complex of buildings was erected in 2007 directly on the A72. The structural facts, latest production equipment and a motivated work force permit a top-flight degree of innovation and flexibility.

Pulsotronic develops, produces and sells metal detectors, separators and custom equipment based on many years of experience in the plastics and recycling industry. Further innovative products were successfully introduced in the food industry and in other branches of industry.

The products distinguish themselves through their high reliability, sensitivity and user-friendliness. A team of engineers permanently works on improvements and customer-specific solutions. The development and production of all the products and custom systems occurs completely at the site in Niederdorf. Thus, it is possible for them to try out new processes and principles and to put them into practice as quickly as possible. In addition, they utilize the synergies of the Group of Companies. Pulsotronic is able to access all the areas quickly, thereby ensuring flexibility, regardless of whether this involves high efficient toolmaker’s shop, plastic transfer moulding, electronic fabrication or EMC laboratory.

Quality assurance and environmental protection are central components of Management. Pulsotronic-Anlagentechnik has been ISO 9001-2008 certified. The initial certification of the Environmental Management System in accordance with ISO 14001:2005 took place in 2007. Pulsotronic-Anlagentechnik supports all aspects of the “ZVEI-Code of Conduct for social responsibility”.

Extensive technical knowledge and outstanding on-site service belong to the basic prerequisites for a successful machinery and systems business. They are pleased to tackle your tasks, while remaining loyal to the motto: “Pulsotronic – complex solutions from one source”

 

Metal detectors for conveyor belts, chutes and roll goods

Series BD            

  • high level of detection since the magnetic field surrounds the products
  • stainless steel housing with long-time stable and water-tight encapsulation
  • available in various detector sizes, adapted for the product
  • fulfills all the requirements in effect currently for AUDITS according to HACCP / IIFS
  • hygienic design

Series TU

  • dividable stainless steel housing
  • stainless steel housing with long-time stable and water-tight encapsulation
  • available in various detector sizes, adapted for the product
  • easy integration, since housing is dividable

Series SP / AR   

  • easily integrated in conveyor belts, since it can be installed flush
  • long-term stable, fully encapsulated in extremely stable metal housing
  • belt stop or reverse motion operation available using reversing contactor circuitry
  • external control electronics with RESET/START-STOP button
  • standard detection widths to 1,200 mm
  • no metal-free zones

 

Metal detectors for bulk materials

Series VA

  • extremely sturdy and compact stainless steel housing
  • device-specific material throughput of up to 14,000 l/h
  • stainless steel ejection unit
  • optionally with wear-resistant product pipe
  • optionally high-temperature application

Series Y

  • extremely effective, quick-reacting pneumatic outward transfer system
  • separates metal from slow back-pressure material columns
  • device-specific material throughput of up to 5,400 l/h
  • extremely flat mounting height
  • optionally high-temperature application

 

Metal detectors for pipe systems

Series extraktor              

  • unique ejection system for integration in suction conveyor – the pipe system remains closed during the ejection of metal impurity!
  • easily integrated into the suction conveyor line with hose connection
  • adjustment-free separating, irrespective of material speed
  • device-specific material throughput of up to 3,300 l/h
  • optionally in wear-resistant model
  • two large inspection doors

 

Control units

M-Pulse2

  • four-quadrant technology
  • multi-frequency technology
  • touch screen / graphical display
  • high-precision product effect offsetting
  • unlimited product memory spaces
  • netzworking / ethernet / USB
  • comprehensive support for peripherals
  • remote diagnostics
  • display transmitted by RS485

 

Find out More

Contact us to learn more about Pulsotronic

Enge Plas Malaysia - MTI Logo

MTI Mixer

About MTI Mixer

MTI Mixer is noted for its ability to turn customers’ wishes into individual machine concepts. With nearly 2,000 machines sold and more than 40 years of expertise and experience, they are the right partner for your company. That’s why customers call them the mixing company.

In their own R&D Center, the heart of the company, they have a wide variety of mixing machines available for customer trials. The findings gleaned from these tests form the basis for optimum customized machine design.

MTI Mixer is a competent partner not only in Europe but all over the world. With subsidiaries in North America and Asia, MTI Mixer is present on three continents. Furthermore, MTI Mixer have over 50 sales representatives for customers to contact around the world if expert advice and technical support are needed.

 

MTI Mixers – Highest Quality

Three factors are essential for outstanding quality and longevity of MTI mixing systems:

  • highly-qualified employees
  • the best materials
  • the latest technologies

MTI Mixer employees receive the best education, are continuously trained to increase their skills and have decades of experience. Some have worked with the company for more than 30 years, their valuable knowledge contributing significantly to the quality of MTI mixing systems.

All MTI mixers are manufactured with high precision and from high-quality materials. 15 to 36 assemblies first arise from 2,500 to 6,000 machine parts in the first assembly step. In the second step, the assemblies are mounted to customer-specific mixers and subsequently equipped with State-of-the-Art control electronics according to current European safety regulations.

The whole production takes place under constant quality control in accordance with DIN EN ISO 9001:2000. Before an MTI mixer leaves the plant, it is first checked for proper function and that it meets all customer requirements.

 

Future-oriented Mixer Mixer Automation

The MTI Mixer control system is setting new standards for mixing and processing equipment with regard to safety, efficiency, economic benefits and reliability. Not only fulfilling, but rather exceeding the requirements has always been the motivation for innovation, which inspires MTI Mixer to highest performance. Out of this passion for the best MTI Mixer has developed the new control system.

By using one standardized control system for all customers worldwide MTI Mixer consequently continues the way of “One Global Level of Safety”. As a minimum requirement, all MTI Mixer control systems are in full compliance with the European Machinery Directive2006/42/EG and if requested extended by national requirements. State of the Art-Technology is not only developed by MTI Mixer it is the solid base of every day’s work.

All MTI Mixer controls are programmed with the SIEMENS Totally Integrated Automation (TIA-Portal). This clear system structure allows the optimum integration of all different control components in one uniform system environment. With this strategy MTI Mixer sets standards again for the entire industry.

  • Fully complies with the standards of the European Machinery Directive 2006/42/EG
  • Safe and reliable operation by integrated fault management and guided operator support
  • Your reliable partner for a smooth production flow in manual and automatic operation mode
  • Modular design with strategy, reduction of components variety and optimized spare part inventory
  • Modern and reliable system architecture with Profi Net / Profi Safe
  • Fast and simple installation and start up by “Plug & Mix”
  • Integrated fault management
  • Worldwide spare part supply through our partners
  • Integrated remote service

 

Reconstruction of Vessels & Tools of All Makes

MTI Retro tec is the answer to the growing worldwide demand for replacement mixing vessels and tools for heating/cooling mixer combinations, vertical mixers and horizontal cooling mixers of all makes.The MTI Retro tec system has made it possible for the first time to record and register data for such parts on site – quickly and inexpensively.

  • high-quality and economical
  • much extended service life – thanks to product-specific material selection
  • use of existing add-on parts
  • outstanding price-performance ratio
  • component optimization and use of additional components, e.g. MTI aspiration system, lance for liquids addition, etc. …
  • one-time on site measurement is sufficient for all subsequent replacements

 

Find out More

Contact us to learn more about MTI Mixer

Enge Plas - Movacolor Logo

Movacolor

About Movacolor

Movacolor is the first choice of plastics producers worldwide that strive for excellence in both injection molding and extrusion. Movacolor doesn’t simply meet customers’ demands for stable production, high quality, improved efficiency and lower costs and scrap volumes –they exceed them because of our constant stream of innovations in dosing technology.

Movacolor’s leadership in dosing technology is based on over twenty years of partnership with plastics producers. They understand that among the most common problems are color and wall thickness variations. The Movacolor dosing technique is based on the in-line dosing of masterbatch, powder, regrind or liquid colorants into virgin material. They combine the dosing cylinder with a stepper motor to ensure consistent flow resulting in reliable color and wall thickness.

 

Broad product line of gravimetric and volumetric dosing machines

Movacolor develops and produces gravimetric and volumetric dosing units and continuous in-line blenders for injection molding and extrusion. These systems meet the need for high volume, quality and reliability in the dosing of masterbatch, powder, regrind and liquids for producers of PET preforms toys, household goods, automotive components, packaging, medical devices, profiles, pipes, cables, sheets, film and many other products.

 

Constant dosing of masterbatch, powder, regrind and liquid additives

Plastic manufacturing companies are looking for different qualities in dosing systems. Some are looking for cost savings on colorants. Some are seeking a more stable production process. Others are attempting to increase efficiency or improve quality. Movacolor systems give the plastics manufacturer all of these benefits in integrated systems for dosing masterbatch, powder, regrind or liquid.

 

Dosing cylinder for regular output

Movacolor’s dosing cylinder is a proprietary invention. The cylinder ensures regular output from the smallest doses (0,01 kg/hr) to the largest (1000 kg/hr). It has an incredibly large capacity range for a single dosing tool (0,7 – 18 kg/hr with GX dosing cylinder). Movacolor’s proprietary system solves the problems of irregular output and stoppages often encountered with traditional dosing devices based on augers or discs.

 

Stepper motor for exact speed

The Movacolor dosing cylinder is driven by a stepper motor. This motor is superior to a DC motor because it functions in steps. This allows the operator to adjust the speed of the cylinder very quickly.

 

Neckpiece for preventing material separation

The Movacolor neckpiece prevents material separation by introducing the colorant directly into the machine throat.

 

Find out More

Contact us to learn more about Movacolor

Enge Plas - Monitor Logo

Monitor Technologies

About Monitor Technologies

Monitor Technologies, LLC provides practical solutions in silo / bin level indication, level measurement and inventory management for the storage and processing of most powder and bulk solids, as well as, some liquids and slurries.

Monitor Technologies also offers solutions for solids flow monitoring, particle emission detection and bin aeration. Most importantly, for over 55 years they have strives to provide high quality products, extensive application support and trusted customer service.

Monitor Technologies’ instruments are backed by:

  • Expert advice based on 55+ years of business in level indication
  • Service department capable of in-factory product repairs or field service
  • On-time, quick delivery
  • Personalized care; Hassle-free transactions
  • 2-Year Warranty on most products
  • ISO 9001 registered quality system that continually pursues best business practices

 

Continuous Level Measurement:

  • Weight & Cable (Plumb Bob) Style Level Sensor
  • Get SiloPatrol SMU App
  • Guided Wave Radar Level

 

Point Level Indication:

  • Rotary Paddle Style Level Indicators
  • RF Capacitance Level Probes
  • Vibratory Level Sensors
  • Diaphragm Style Level Switch
  • Tilt Switches
  • Proximity Switches

 

Inventory Management:

  • SiloTrack Inventory Software
  • HMI2 Operator Interface

 

Moisture Measurement:

  • In-Line Moisture Measurement System

 

Mass / Solids Flow:

  • In-Line Microwave Mass Flow Measurement System

 

Solids Flow Detection:

  • Microwave Solids Flow Monitor

 

Particle Emission Detection:

  • Triboelectric Particle Emission / Broken Bag Monitor

 

Bin Aeration:

  • Rectangular Air Pad
  • Evasser and Flo-Pad

 

Common Target Materials:

Cement and aggregates, fly ash, coal salt / minerals, biofuels, chemicals, feed and grain, pet food, baking and snack ingredients, pulp and paper, pharmaceuticals, plastics and more powders and bulk solid materials.Also some slurry and liquid applications.

 

Find out More

Contact us to learn more about Monitor Technologies

1 2 3